Market leading battery tester and analyzers from Midtronics.

The Midtronics Intech 25 supports AGM and lead-acid battery testing with one tester. Besides common Lead-Acid batteries also AGM batteries can be diagnosed.

• Temperature Compensated Testing Accurate test results under all temperature conditions
• Clear Diagnostics Diagnose on State of Health and State of Charge

Battery-standards
There are four standards (En, DIN, IEC, SAE) pre-programmed in the tester. The JIS conversion table can be found on the backside of the tester.

Starting System Test
Diagnosing the starting system is very easy as the tester stores the lowest voltage that occurs during starting.

Charging System Test
Diagnosing the charging system is very easy as the tester stores the lowest an highest voltage that occurs.

Diagnostics
The testers display the measured values on the LED screen and the diagnoses with easy to understand LED’s.

Voltmeter
Temperature Compensation
AGM battery testing
Battery voltage (SOC) indication
Battery diagnosis (SOH)
CCA VALUE TESTING (INTECH 25)
STARTER and ALTERNATOR test (INTECH 25)

Applications:
12 volts automotive Lead Acid (Flooded), and AGM batteries
12 volts starting and charging systems
Standards: EN, DIN, SAE, IEC
Operating range (A):
200 – 900 EN/SAE
120 – 550 DIN/IEC
JIS conversion table on backside
Display: LED (4,1)
Cable length: 0.40 m
Voltmeter: 5.5 – 19.99 volts DC
Power requirements: Analyzer is powered by the battery under test down to 5.5 volts
Warranty:
Midtronics standard two (2) years
Content:
Tester and manual in clamshell