Nitrogen generators for tyre filling: TyGER 1 Preis auf Anfrage
plus. 19 % Tax excl.
   
 
Shipping time:
3-4 Days

Product No.:TyGer1 / Frage zu diesem Produkt

  Print product data sheet
Nitrogen generators for tyre filling: TyGER 1
Nitrogen generators for tyre filling: TyGER 1
Nitrogen generators for tyre filling: TyGER 1

Nitrogen Generators for tyre filling: TyGER 1
  • Professional Nitrogen generators for tyre filling
  • Professional, reliable and easy to use: only needs compressed air to work
  • 1 (TyGer 1) and 3 Nm3/h (TyGer 3)capcity versions available.
  • Ideal for motorcycles, automobiles, SUVs, jeeps, vans.
  • ON-BOARD TANK integrated with the system to ensure ample nitrogen supply and reduce recharging time.
  • AUTOMATIC FILLING of the on-board tank to guarantee optimal circuit pressure at all times
  • Integrated VENTURI SYSTEM with VACUUM METER that not only speeds up tyre emptying but also permits inflating with nitrogen with no intermediate stages
  • WHY INFLATE YOUR TYRES WITH NITROGEN?
    • Because nitrogen gas guarantees more constant tyre pressure and temperature over time.
    • More constant pressure means more uniform tread wear
    • Constant pressure means increased safety while driving, thanks to better tyre adhesion on the road.
    • Constant temperature reduces the risk of tread deformation and damage.
    • Longer tyre life.
Key Features :
  • PRESSURE GAGE with vacuum indicator
  • BRAKING WHEELS .
  • ON_BOARD TANK AND MEMBRANE .
  • FILTER REPLACEMENT VISUAL INDICATORS.
  • CONDENSATION CONTAINER.
  • FILLING GUN WITH PRESSURE GAUGE AND SPIRAL HOSE.
  • SET OF GREEN CAPS FOR TYRE VALVES.
Technical Data :
  • Membrane capacity in standard operating conditions: 1Nm3/h (Tyger 1) and 3Nm3/h (Tyger 3).
  • Nitrogen purity > 96%.
  • Integrated 24-liter on-board tank for storing more than 192 liters of nitrogen at 8 bar.
  • Automatic tank filling every time pressure drops below 7 bar.
  • Oil-removal filter with visual indicator for clogging: capable of filtering solid and oily particles up to 1 micron and 0.1mg/m³.
  • Active-carbon filter to remove all vapors from the delivered nitrogen.
  • Inlet air pressure from 9 to 13 bar.
  • Pressure gage with visual indication of vacuum level.
  • Approved filling gun with dual-scale bar and Psi pressure gage.
  • Easy-to-replace filters
  • Braking wheels
  • Waste condensation container.
  • Acceptable air inlet temperature: from 10 to 40°C
  • Size (LxHxD) : 50 x 90 x 47 cm
  • Colour: GREY


Frage zu diesem Produkt




eCommerce Engine © 2006 xt:Commerce Shopsoftware
Parse Time: 0.189s