AMI 3.6 CLassic -Top 2 Column Vehicle Lift (3.6-tons lifting cap WAS Werkstattausrüstung

AMI 3.6 CLassic -Top 2 Column Vehicle Lift (3.6-tons lifting cap

Preis auf Anfrage / Price on Request!
plus. 19 % Tax excl.

Shipping time:

2-4 weeks

Product No.:AMI CLASSIC 3,6 / Frage zu diesem Produkt

Print product data sheet

AMI 3.6 CLassic -Top 2 Column Vehicle Lift (3.6-tons lifting cap

AMI 3.6 CLassic -Top 2 Column Vehicle Lift (3.6-tons lifting capacity - Asymetric Hydraulic Lift-

Features and Fuctionality:

Robust and slim 2-column hydraulic lift with a maxium loading capacity of 3600kg
High quality 2-column vehicle lift: The hydraulic lifts are already used for several years within the Service Garages and Workshops of one of the biggest European Vehicle manufacturers.

We receive many positive feedbacks from customers that use these lifts within their garages.

Combines the advantages of a hydraulic vehicle lift with the price level of a mechanic vehicle lift.

Asymetric lifting arms (2-step-extension) Long arms extension on request.

2 Years Warranty (Correct installation required)

TÜV DIN-ISO Certification and CE marking

Security switch-off at the top of the lift to avoid damagas of the vehicle roof.

The vehicle lift will delivered almost completely pre-assembled. This allows an easy setup and installation.

Please consider the requirements of the garage and workshop concrete to ensure a secure and stable construction (See below)

Options and accessories:

Also available as 2-columns lift with 3 tons, 4 tons and 5.5 tons lifting capacity => also see our shop
3 stage asymetric lifting arms
Quick-lift option

Technical data 2-column hydraulic vehicle lift:

Maximum lifting load: 3600 kg Noise Level: 74db Maximum Lifting Time: 60 seconds Lowering Time : 20 seconds Power System: 3/N/PE AC 400Volt/230Volt / 50 Herz x Motor Power: 2,2 KW 16 Ampere primary protection Hydraulic working pressure: 22 MPa Operating temperature: 5-50 Grad Celsius Amount of hydraulic oil: 6 liters(Viscosity 32) Transport weight: approx. 650 kg Lifting height: 175 cm Required height under vehicle: 10cm Total height: 3.67 meters Max. Drive through height: 3.55 meters Max. Width between the columns: 3 meters Max. Drive through width: 2.15 meters Extension of short arm: 57-89 cm Extension of long arm: 93 cm up to 1.48 meter

Delivered items:

3.6-tons 2-columns vehicle lift -hydraulic version
Operating and installation manual
Anchoring accessories
Vehicle lift is already pre-assembled. .

Set-up, requirements and warranty:

Correct assembly, anchoring and installation should be carried out by experienced service technicians. The lifting platforms should be installed on a solid concrete base. Crushing strength of minimum 15 MPa. Minimum 20 centrimeter concrete thickness (concrete area at least 120 cm x 70 cm x 55 cm)

Electric system 400V, 16Ampere Fuse should be reachable near the column lift. Ceiling height should be 10cm higher than the totasl height of the lift.

Please get in contact for further information.

Frage zu diesem Produkt