Hydraulic 2-post Mercedes Benz Sprinter and Transporter Lift: 2 Preis auf Anfrage / Price on Request!
plus. 19 % Tax excl.
   
 
Shipping time:
2-4 weeks

Product No.:AMI5,5VAN / Frage zu diesem Produkt

  Print product data sheet
Hydraulic 2-post Mercedes Benz Sprinter and Transporter Lift: 2
Hydraulic 2-post Mercedes Benz Sprinter and Transporter Lift: 2
Hydraulic 2-post Mercedes Benz Sprinter and Transporter Lift: 2

Hydraulic 2-post Mercedes Benz Sprinter and Transporter Lift: 2 Column Vehicle Lift 5.5 tons lifting capacity


Features and Functionality:

  • Robust and slim 2-column hydraulic lift with a maximum loading capacity of 5500kg

  • Can be delivered with different heights:
    Total height: 4 meters, 4.3 meters, 4.6 meters or 4.9 meters.

  • High quality 2-column vehicle lift: The hydraulic lifts are already used for several years within the Service Garages and Workshops of one of the biggest European Vehicle manufacturers.
  • Can be used for Mercedes Benz Sprinters and can be configured for extra long transporters with a high roof (option extra long 3-stage asymmetric extension arms)
  • We receive many positive feedbacks from customers that use these lifts within their garages.
  • Combines the advantages of a hydraulic vehicle lift with the price level of a mechanic vehicle lift.
  • Asymmetric lifting arms (3-stage-extension). Extra Long arms extension on request.
  • 2 Years Warranty (Correct installation required)
  • TÜV DIN-ISO Certification and CE marking
  • Security switch-off at the top of the lift to avoid damages of the vehicle roof.
  • The vehicle lift will delivered almost completely pre-assembled. This allows an easy setup and installation.
  • Please consider the requirements of the garage and workshop concrete to ensure a secure and stable construction (See below)
Options and accessories:
  • Available in different heights from 4 meters up to 4.9 meters
  • Also available as 2-columns lift with 3 tons, 3,6 tons and 4 tons capacity => also see our shop
  • Extended: 3 stage Asymmetric lifting arms
  • Quick-lift option
Technical data 2-column hydraulic vehicle lift:
  • Maximum lifting load: 55000 kg
  • Noise Level: 74db
  • Maximum Lifting Time: 60 seconds
  • Lowering Time : 20 seconds
  • Power System: 3/N/PE AC 400Volt/230Volt / 50 Hertz x
  • Motor Power: 3 KW
  • 25 Ampere primary protection
  • Hydraulic working pressure: 22 MPa
  • Operating temperature: 5-50 Grad Celsius
  • Amount of hydraulic oil: 8 litres(Viscosity 32)
  • Transport weight: approx. 750 kg
  • Lifting height: 185 cm
  • Required height under vehicle: 13,5 cm
  • Total height: 4 meters (other versions on request)
  • Max. Drive through height: 3.86 meters
  • Max. Width between the columns: 3 meters
  • Max. Drive through width: 2.7 meters
  • Extension of arms: 70-142cm
Delivered items:
  • 5.5 tons 2-column vehicle lift -hydraulic version-
  • Operating and installation manual
  • Anchoring accessories
  • Vehicle lift is already pre-assembled. .
Set-up, requirements and warranty:

Correct assembly, anchoring and installation should be carried out by experienced service technicians. The lifting platforms should be installed on a solid concrete base. Crushing strength of minimum 15 MPa. Minimum 23 centimetres concrete thickness (concrete area at least 150 cm x 100 cm x 55 cm)

Electric system 400V, 25 Ampere Fuse should be reachable near the column lift. Ceiling height should be 10cm higher than the total height of the lift.

Please get in contact for further information.



Frage zu diesem Produkt




eCommerce Engine © 2006 xt:Commerce Shopsoftware
Parse Time: 0.252s